Hub Packs
Freewheeling one way clutch with a maximum capacity of 12 pound inches.
Installation should be designed so that all extraneous loads are taken through the housing journal, not through the Hub-Pak. A knurled press fit or pin can be used to secure the cartridge to the shaft.
Limited to .250 dia shaft.
Direction of drive must be specified at time of order
Line Drawing:
Sku List:
| CARTRIDGE NUMBER | CAPACITY IN/LBS MAX | DRIVE ROLLS | USE RACE DIA. | A +/- .005 | AA +/- .005 | SAE B +0.001 / -0.000 | Metric B +0.03 / -0.00 | C +/- .005 | D +0.003 / -0.000 | E+/- .005 | F +/- .005 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G30-4 | 7 | 4 | .6265/.6245 | 0.375 | N/A | .250 | 4 | .015 | N/A | N/A | N/A | QUOTE | DRAWING |
| E31-4 (L or R) | 12 | 4 | .6265/.6245 | N/A | .500 | .250 | 4 | .015 | .062 | .062 | .312 | QUOTE | DRAWING |
| E33-4 (L or R) | 18 | 4 | .6265/.6245 | N/A | .500 | .250 | 4 | .015 | .062 | .062 | .312 | QUOTE | DRAWING |
G30 Press fit onto shaft. E31 and E33 match drill and pin to shaft. Specify left or right drive for E31 and E33.
Right Drive: Hub pak drives housing clockwise when viewed from extention end of cartridge.
Left Drive: Hub pak drives housing counter-clockwise when viewed from extention end of cartridge.
| HOUSING NUMBER | G +/- .005 | H +/- .005 | I +/- .005 | J +/- .005 | K +/- .005 | L + 0.000/ - .003 | M +/- .010 | N T.I.R. | R RACE | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| GQ306-4 | .422 | .750 | .906 | .531 | .514 | .750 | .032 | .022 | .6265/.6245 | QUOTE | DRAWING |
