Homepage » Toothed Jaw Clutches » Jaw Clutches
Download Ordering Spec Sheet
Jaw Clutches
Jaw-type Polyclutches permit extremely simple, reliable phase adjustment, and/or engage-release between a shaft and gear, pulley, roller, etc. The D Series is knob operated, the J Series is lever operated. Clutch teeth are precision machined from solid steel blanks, 30 tooth spacing (120 teeth) is standard. Alternate spacings are available. All Polyclutch jaw clutches are stronger than the shaft driving it. Various designs are possible, limited only by the ingenuity of the designer.
Download Ordering Spec Sheet
SAE
| Model Name | A | B | C | D | E | F | P | Q | R | S | Key | CAD Download | Request Quote |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DH 20 |
1.250 | 0.250 | 1.870 | 0.562 | 0.390 | - | - | - | - | - | - | Login to Download | Request Quote |
DH 32 |
2.000 | 0.500 | 2.500 | 1.252 | 0.750 | - | - | - | - | - | - | Login to Download | Request Quote |
DJ 20 |
1.250 | Jaws Only | Request Quote | ||||||||||
DJ 32 |
2.000 | Jaws Only | Request Quote | ||||||||||
DK 20 |
1.250 | - | - | 0.562 | 0.390 | 0.375 | 0.338 | 0.032 | 0.833 | 0.845 | #212 | Login to Download | Request Quote |
DK 32 |
2.000 | 0 | 0 | 1.252 | 0.750 | 0.750 | 0.703 | 0.048 | 0.890 | 1.470 | #606 | Request Quote | |
JH 32 |
2.000 | 0.500 | 3.370 | 1.252 | 0.750 | 0.750 | - | - | - | - | - | Login to Download | Request Quote |
JK 32 |
2.000 | - | - | 1.252 | 0.750 | 0.750 | 0.703 | 0.047 | 0.890 | 1.625 | .187 SQ | Login to Download | Request Quote |
